Home Forums Hunting & Shooting Long Range Hunting Next best projectile to a 160gr Accubond

I am currently building a 1974 remington 700bdl chambered in 7mm. Everyone says used 160gr accubond but they are absolutely no where to be found. I currently have 50 projectiles. So with that being said what's the next best thing not wanting to go over 160gr this is first and foremost a hunting rifle any help would be greatly appreciated...

I put a lot of animals in the dirt with Nosler Partition 175 grain bullets.
The 160 grain Nosler A/B is a great bullet, I like it very much. Easy to work with, works well on game.

I seen some last week for sale. Keep doing your homework, searching the retailers on the web.

Wishing y'all the best.

Try Federal 160g trophy bonded tip. Pretty similar performance.

150 Swift Scirocco
160 Partition
139, 140, 145, 150 Barnes TTSX LRX’s
Hammers

I like the 160 Accubonds myself but I wouldn’t lose sleep if I couldn’t find them. Lotsa others out there that’ll fill in easily.

When I’m out of 160gr NABs for my 7mmRM rifle, I’ll likely move to the LRX, TTSX, or the new Hornady version. Standard cup/cores in 284 are fine for deer, but can be a bit destructive at 3000+. If going that route, I’d try the 162 SST or Interlock.

I came to love the 160 grain Partition in my two 7 Mags.
But I doubt you can find those either.

I'm not a pessimist; but, it seems that .284 bullets are the lowest priority of any bullet manufacturers at this time as they try to come back online with what resources are available. The 160 Accubonds, along with many others, will eventually find the way back to we end users. I think the best advice I can give you is to find whatever bullet you can that is available in the quantity you need or desire and nab them. Then, get picky when they all come available again. The alternative is to pay the premium demanded by those who have them and sell them at gun shows or on gunbroker. Value, like beauty, is in the eye of the beholder. Good luck with your new rifle.

For deer and Axis sized game here in Texas the 140 gr. Ballistic Tip is a hammer. Performs way above what you'd expect of a polymer tipped bullet of other makers at 3000 fps +.

Hope this helps.

BBQ

I'd have to give the 150gr Scenar and Ballistic Tips a try if trying to stay under 160gr.

No personal experience, just making that comment on reputation alone.

Sierra Tipped Gameking 165gr and Hornady Interbond 154gr have both worked well for me. Nosler’s (of any calibre) have become extinct here in South Africa…

I've shot a lot of 160 accubonds but when I went after elk I used the 145 LRX. I don't know if they're available or not but they're more bullet than the 160 accubond and I wouldn't hesitate to use them. Both my elk fell to them.

155 or 169 grain Hammer Hunter

with a 9T the 143 grain Hammer Hunter

Shooters Pro Shop had some grade C red tipped made for Winchester 160gr Accubonds the last couple of weeks.Besides the 160gr Accubond,I really like the 150gr Ballistic Tip.I get just a little bigger wound channel than the Accubond and every one has exited.Those also have been hard to find lately too.6.5 and now 270 has been taking over bullet manufacturing lately,so the 7mm and even 308 bullets have been kind of limited.

For Georgia-sized animals I've consistently found that the 120gr 7mm bullets kill faster than all the heavier weight bullets do. They also kill larger animals well. They are much shockier than the heavier bullets and stuff tends to fall over quicker.

For elk sized animals all the bullets that beretzs mentioned are good.

Probably should ask this question with those bullet limitations on the regular reloading forum, not the long range forum. There isn’t a bullet in .284 at or under 160 grains that I would consider for long range shooting or hunting

160 grain ballistic tip is pretty good.

Its a "hunting rifle", use a 162 Hornady btsp interlock.

I love to discuss and debate the best bullet for general-purpose hunting, but almost any name brand big game bullet will do in the real world.

the 160 accubond is a good bullet for 7 rem mag, but I prefer the 150 Scirocco.

Exactly

Yep, most will work great out to say, 300

This is the long range forum, and the 160 Accubond has a pathetic .531 BC

Only 8.5 mils up at 1000.

Same here, but in my two 7 STW's.

Tony

I was going to say reach your way for 7mm reccs…then I saw you’d already answered.

There’s a lot of good 7mm bullets out there. Honestly I forgot about the 150 and 180 Scenars which I haven’t taken game with but have with a few other models and they’ve worked great.

Hornadys 175 ELD would be fine too. I just can’t tie myself to thinking anything is that much better than about 10 others, unless we’re talking Bitterroots, then all the rest suck

Yeah, 300 shooting off hand. The lowly 162 btsp has a bc of .514, however I have made some pretty far shots with it. The furthest was actually a 1 shot kill at 700 yards.. Like 79s said, only "8.5 mils" up. In my case that day, it was like 12.2 moa up, but same difference. Dead buck with a bullet hole through the heart. This chidt really isn't that hard..

Been using them and partitions for 45 years, never a problem!

With 7mm projectiles being hard to come by these days, I've noticed the 150 Scenar seems to be more available than a lot of others and are currently in-stock at a couple of places I order from regularily. I've been shooting the 180 Scenar in a 7mm SAUM and just got a couple boxes of the 150's to try in some lower velocity 7mm's. I wonder how the 150's would perform at 7 mag velocities - might be a good option? I wouldn't hesitate to give Hammer bullets a try - I've just started experimenting with them and hear good things. More importantly, they're readily available, though expensive...

I know there is a fella on here, Hiaring or something similar that ran them for a season from a 7 Rem Mag and had nothing but great stuff to say about the 150 Scenars. I know the 180 version shoots like crazy in my Mashburn and I believe Dober ran some 150's in his Mashburn a bit as well.

Agree on Hammers, so far they are really easy to get shooting.

Yep Big B, when my 160 ab's are gone it'll be 177gr Hammers at 3000 fps from my 8 twist 7 Super Masher for the win.

162 Eldx does the job for us.

Love the good ol' 7mm Remington Magnum! I've taken elk, mule deer & pronghorn with mine. Also saw a Brooks Range grizzly brought down with one shot from a 7mm Rem Mag using the 140 grain Barnes TSX! And a black bear dropped at 500 ish yards with that same bullet.

I ran into kind of a sleeper of a bullet a couple of years ago, the plain-Jane 160 grain Sierra Gameking SPBT. Loaded it up to max with Reloader 22, saw over 3000 fps and really sweet accuracy, like 1.5" groups at 300 yards. I was going to hunt with 160 gr Nosler Partitions, but... these grouped so well, and I was only hunting mule deer & pronghorn antelope that season. Boom, one shot at about 150 yards and the fat young muley buck fell. Shot was a bit far back. My fault. The recovered bullet looked amazing! Found it in the off-side hide. I was impressed with the quick kill and the classic mushroom:



That said I like a lot of bullets from 140 - 175 grains from the 7mm Remington Magnum. The 175 Nosler Partition blew right through, leaving a big dead bull elk behind...

Pick your powders carefully. I've been quite impressed with IMR 8133 of late, Reloader 22 before that.

Regards, Guy

That’s a sleeper of a bullet Guy. Couldn’t ask for much more of a great deer bullet.

Sierra made a run of 7mm 150 TGK's. I've seen them for sale on multiple sites of late.

ZERO experience with them, but currently available.

Can't believe nobody has mentioned the 168 Berger. That is THE bullet to shoot in the 7 rem in my book.

The old speer 160g hotcor, the flat base not boat tailed one, works well too. It's kind of a sleeper bullet too. I have a few thousand I bought on sale just to keep around for a back or or for cheap friends and family. I load the 150g 270 flat base hotcore for a few friends too. They swear by them and have me load them another 100 rounds every 5 years or so.

One friend I build a cheap 270 for with an Alaskan ti take off I put on an sps action for him. He wanted a 270 because he could get cheap factory ammo but now he'll only shoot 150 hotcors over 59g of imr7828. My old standby for 270 friends and family. Tightwad get hot cors others get 150 partitions.

Bb

Yessir, that's a great bullet too.

Just to pass on a friend's experience - several years ago he did a plains game hunt in Africa and used the outfitter's 7x64 Brenneke. He said the rifle was shooting the "plain ole" 162gr. Hornady BTSP and he couldn't help but take note on how spectacularly that bullet performed on everything he shot - the biggest being a kudu.

Any of the bullets listed above will work fine for Gordon county bucks. Truth be told, I’d be tempted to try the 120 grain ballistic tips there. Tough tough little bullet.

Other than the 160gr Accubond I have used the 160gr Nosler Partition for Elk. Worked just as good as the Accubond. 2 years ago on my Moose hunt

In Alberta Canada I used the 160gr Federal Trophy Bonded Tipped. Bullet double lunged moose and keep going. 160gr Nosler Partition bullet was found under skin next to Trophy Bonded Tipped.

Hunting partner had fired the 160gr Nosler Partition from a factory load. Mine was a hand load with H1000 at 3050FPS.

Hammer bullets in light for caliber weights are far superior to any lead projectile bonded or not. Driven fast they work like a bolt of lightning.

The OP never stated the intended use. The average hunter virtually never needs to shoot past 300, or 400 yards, so many bullets will work just fine. For deer-sized game, the 139 Interlock is great. I like the 160 Partition for elk and the 175 Interlock is also good. The way it is now, you had better be willing to shoot what you can find. The ELDX and ELDM are both decent for shooting distance, too.

Federal Trophy Bonded Tipped, or good old Nosler Partition. Both have worked for me.

I have had excellent results with the 150 gr Barnes TTSX as have several of my hunting buds. I’m currently experimenting with 139 gr and 145 gr LRX in a 7x57. The Federal Terminal Ascent looks like a good option, too. YMMV

They keep rumoring a 175 TA 7mm.. That'd be a helluva bullet in my Mashburn.

Federal could sell more components if they gave a [bleep] about ever having any avaliable. They dont.

I know the OP wanted under 160, but, I've run the Nosler 168 gr LRAB in my 7 Rem mag since they came out. Using H1000 I run them at 3025 fps.

After 10 or so elk, I think they are a bit soft for my taste on elk and I went back to partitions for them. The 168 LRAB are a pretty darn good mule deer and whitetail bullet though.

Regards,
Manny

My rifle didn’t like 160AB’s but shoots the 150 TTSX very well and in terms of performance on game the Barnes is much better if bones are encountered. It will break a shoulder bone on the way in & keep going.

Those are very hard to find, but a pretty sweet bullet:

That's a beautiful bullet as well and very easy to get to shoot well. I'd pick that over the accubomb if I had the 2 to pick from.. Hell, there are so many good bullets out there to chose from. 140 TTSX, 145 LRX to also name a couple good ones..

160 patlrtition would be next

162 Eldx or 165 TGK?

160 AB and 160 Partitions are plentiful if you know where to look.




P

150 ballistic tip. 162 eldx.

If you're interested in a full 50 ct. box of 160 Partitions and a full 50 ct. box of 150 gr. Ballistic Tips to use for load testing, I've got one of each that I need to sell. PM me if interested.

I would read your book as you are correct on this issue.

I have used the 180 gr VLD a bunch but for the 7mm Rem Mag I think the 168 might be the ever so slightly better choice.